Menu
Locate and manage all your devices in one place.

BCE - FM-500 Blue+

 
From $0.99 USD*
       
Pay as you go. No contract
FM-500 Blue+
Visit the manufacturer website

FM-500 Blue+ is a device with GPS/GLONASS and GSM connectivity, designed for object tracking. It is able to acquire information on object location, speed, direction, etc. and transfer the data via GSM network. Digital and analog inputs of the device may be used to connect different external sensors/devices. Outputs of the device may be used to control external equipment remotely. FM Blue+ is able to read FMS CAN data (protocol J1939) from vehicles. Flexible configuration allows users/dealers to adjust the device to meet their specific requirements.

 

General

 

Interfaces

FMS CAN (protocol J1939)

Volvo/Renault CAN (protocol J1708, without adapters)

OBDII (diagnostic protocol of light vehicles, SAE-1979 w/o adapters)

CAN protocols of light vehicles (without adapters)

1-Wire (iButton)

RS-232

EIA-485

Inputs

4x digital (frequency, impulse counter, ON/OFF modes)

3x analogue, 11 bit, 0-36V

Outputs

3x digital, (-)

Power supply

8 – 36V

Protection from impulses up to 120V

Consumption at 12V: active: <50mA, sleep: <8 mA

Registration of power cut-off to device event log

Internal battery 700 mAh (optional)

Internal memory

4 МB, up to 150.000 entries

Accelerometer

LIS3DH

Internal odometer

+

Operational temperature range

from -40 to +85 C°

Dimensions

26x80x55 mm

Weight

Tracker – 64 g, set – 160 g

GSM

Internal antenna

GSM/GPRS class

10 (up to 85,6 kbit), class B

Detection of GSM jamming

+

 

 

GPS / GLONASS

External antenna

Sensitivity

-162 dBm

Acquisition

Cold <30 s, hot 1 s, A-GPS support

 


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port
    d.plaspy.com 54.85.159.138 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.