Menu
Locate and manage all your devices in one place.

CanTrack - TK103

 
From $0.99 USD*
       
Pay as you go. No contract
TK103
Visit the manufacturer website

this product working Based on existing GSM/GPRS network and GPS satellites, integrate tracking, listening, tracing and anti-theft all in one newest product. It can locate and monitor any remote targets by SMS or GPRS.

1.  Remote switch on and off

2. Single Tracking

3.  Monitoring

4.  Data Storage

5. Geo-fence alarm

6.  Movement alarm

7.  Overspeed alarm

8.  Vibration alarm

9.  Set all alarm mode

10.  Sound Triggered callback

11.  Check the vehicle State

Configuración TK103

Country Operator APN User Password

To set p1D17p you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Begin with the configuration
    RhhtzGkSBBg
  2. Set up our operator APN
    inxSBfLPF WJn7mzE
  3. Set the username and password of APN operator
    LgIH GdQG2t4q ETjhNf2Z
  4. Define our tracker ID with which you will communicate with p1D17p normally the last 11 digits of IMEI, we replace our 11 X identifier
    t1X9wM3V3ocCkNSRp
  5. Establish the server where we will connect
    osAk28dcDSwExVhWJugxiqG
  6. Define how often we will pass on to our example 120 seconds
    jQsbdfxWI
  7. switch to GPRS mode to begin transmission
    3mWtbZWCI


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.