Menu
Locate and manage all your devices in one place.

Cartrack - iTRACK PRO AVL

 
From $0.99 USD*
       
Pay as you go. No contract
iTRACK PRO AVL
Visit the manufacturer website

The iTrackPro AVL is a system based on GPS/GPRS technology developed and designed for vehicle tracking and fleet management in real time.

It has a GPS module incorporated that allows to get accurate position data and use its GSM module to send the information to preconfigured server or cellphone.

Its internal memory allows to storage the GPS coordinates when there is no GPRS coverage or in time intervals configured by the user.

    Main Functionalities

  • SMS and GPRS TCP/UDP Communication.
  • Tracking on demand
  • Vehicle tracking from your cellphone.
  • Tracking per time intervals.
  • Remote hearing through calls (optional).
  • Storage when there is no coverage.
  • Datalogger capabilities, 130.000 waypoints (optional).
  • Movement sensor included for power saving.
  • Panic button.
  • Motion alert.
  • Geofence configuration.
  • Battery low charge alert.
  • Overspeed alert.
  • Remote Engine block.

    Features

  • Power supply: +9V to +36VDC.
  • Back up Battery: 850mAh.
  • Normal power consumption of 28mA/h.
  • Dimensions: 104mm x 62mm x 24mm.
  • Weight: 450g.
  • Operation temperature: -20º to 55º C.
  • Humidity: 5% to 95%.
  • Frequency: QuadBand GSM 850/900/1800/1900Mhz.
  • GPS Module: last GPS SIRF-Star III chipset.
  • GPS Sensitivity: -158Db.
  • GPS frequency: L1, 1575.42 MHz .
  • Channels: 20 channels all-in-view tracking.
  • Position accuracy: 10 meters, 2D RMS.
  • Velocity accuracy: 0.1 m/s.
  • Datum by default: WGS-84.
  • Altitude limit: 18,000 meters (60,000 feet) max.
  • Speed limit: 515 meters/seconds max
  • Led: 2 leds to show the GPS/GSM status.
  • Flash Memory: 8 MB.
  • Button: One SOS button.
  • Interface: 5 digitals inputs, 5 digitals outputs and 2 analogue inputs.

 

 


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port
    d.plaspy.com 54.85.159.138 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.