IDD-213GL is an intelligent on-board diagnostic device compatible with passenger and commercial vehicles, it features plug-and-play technology, could read diagnostic info from vehicle ECU and capture location data, then send them to backend server for real-time remote diagnostic and tracking purpose.
Industrial class components with high quality
OBD II/EOBD, J1939 and J1708 compliant
Comprehensive data collection and analysis, including diagnostic data, location data and driving behavior data
Read diagnostic data, including vehicle speed, RPM, ECT etc.
Read diagnostic trouble codes and freeze frame data
Fuel consumption statistic
Driving behavior monitoring, including speeding, hard acceleration/deceleration, idle engine etc.
Support passenger car / heavy duty / tracker mode
Up to 24,000 GPS data storage
Data reporting according to time interval, distance and heading change
Ignition on/off detection
Vehicle battery monitor
Base station ID report (when no GPS signal)
Internal battery for unplug notification
Fleet management, Service shop / Car dealer, Insurance company.
Working Voltage: 9-36VDC
Sleep mode: <10mA@12/24VDC
Backup battery: 3.7V/160mAH
Working Temperature: -30℃ to 70℃
Storage Temperature: -40℃ to 85℃
Humidity: 5%～95%（no frog）
Network protocol: Embedded TCP/IP stack
GPS channels: 50 parallel channels
Positioning method: GPS/A-GPS
Cold start: <32s (typ.)
Warm start: <32s (typ.)
Hot start: <1s (typ.)
Data transmission: GPRS/SMS
GPS Accuracy: 5m CEP
The default secret key for SMS instructions is the last 6 ASCII characters of device ID, this secret key can only
modified by PC Tool.
Set the APN settings and server IP Lk0n51oJBMmfOU DdFRGQLlr6GOn8tsbLPCYgHo9nUg4OJGii582yxCGj34hrOqaT