Menu
Locate and manage all your devices in one place.

Coban - GPS104

 
From $0.99 USD*
       
Pay as you go. No contract
GPS104
Visit the manufacturer website

Detailed description:
It is based on GSM/GPRS(850/900/1800/1900MHZ)wireless telecommunication internet and GPS satillite global position system,track by several ways.provide monitor software and global map.real-time track through the monitor software in your pc;track through your PDA cell phone and googleearth.

 

Function:

  • Add and Delete Authorization
  • Single Locating
  • Auto track continuously
  • Track with limited times upon time interval
  • Track with unlimited times upon time interval
  • Smart track upon time and distance interval
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Get location in absolute street address
  • Location Based Service (LBS)
  • Check the Vehicle State
  • Terminal (local) Time Setting
  • Monitor (Voice Surveillance)
  • Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • Cut off the Oil and Power System
  • Execute immediately Mode
  • Execute depends on speed(Default mode)
  • Resume the Oil and Power System
  • Tracker’s Hardware Resetting
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • Deep Sleep by Shock Sensor
  • Start Work on specific time
  • No sleep mode
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over Speed Alarm
  • Accident alarm (Option)
  • Shock Sensor Alarm
  • SOS
  • Low battery alarm
  • Power off alarm
  • GPS blind Spot alert
  • TCP/UDP switch
  • Configure parameters by USB
  • GPRS Setting
  • Modes Switch between “SMS” and “GPRS”
  • Less GPRS traffic
  • GPRS tracking & monitoring platform
  • Set up monitor center number

Configuración GPS104

Country Operator APN User Password

To set Ppwcnf you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial setting from the device

  1. Factory reset
    8cTxDcUig8u
  2. Set the time zone UTC-0
    PizX 4iqIfBJEfN W
  3. Set up our operator APN
    we2vHBLbT yxcrqMO
  4. Set the username and password of APN operator
    7Pp4YnGR UcDdVGIL L2Vfm1ne
  5. Establish the server where we will connect
    UQU3MQLO2GTLH uZkKFjFowa78o jCs0
  6. Switch to GPRS mode to begin transmission UDP
    8fjBtGgcEGgiHG
    or
    GKe9FsjtQK

To check settings f9VGOHVuIeL

To enable the status of the fuel sensor or improve the transmission of the status of the digital sensors FlKozxtWvv47T7 Ep


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.