Menu
Locate and manage all your devices in one place.

Coban - GPS303

 
From $0.99 USD*
       
Pay as you go. No contract
GPS303
Visit the manufacturer website

Working Based on existing GSM/GPRS network (850/900/1800/1900Mhz) and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

Function:

  • Change Password
  • Authorization
  • Single Locating
  • Auto track continuously
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Absolute street address by SMS
  • Location based service (LBS)
  • Voice Monitor -Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • Alarm Function
  • Low battery alarm
  • External Power off alarm (Suitable for B, C and D model)
  • GPS blind Spot alert
  • SOS
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over speed alarm
  • ACC working alarm (Option, for model B, C, D)
  • Fuel alarm (Option, for model C, D)
  • Cut off the Oil and Power System (Option, for model C, D)
  • Arm
  • Silent Mode
  • DISARM
  • Door alarm (Option for model C and D)
  • ACC alarm (Optional for model B,C,D )
  • Shock Sensor alarm
  • Alarm without GSM network service
  • Check the Vehicle State
  • Reset Hardware
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • No sleep mode
  • Set up Terminal (local) Time
  • TCP / UDP Switch
  • Configure parameters by USB
  • GPRS setting
  • Setting up APN
  • GPRS User ID and password Setup
  • IP and port setup
  • Less GPRS traffic
  • Modes Switch between “SMS” and “GPRS”
  • Set up monitor center number

ConfiguraciĆ³n GPS303

Country Operator APN User Password

To set dlScBn you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial setting from the device

  1. Factory reset
    kvn9foM1Uou
  2. Set the time zone UTC-0
    ilnc Wd1WLVrOVL 9
  3. Set up our operator APN
    FAXgIZyLK 2NpmVvq
  4. Set the username and password of APN operator
    dnClxWoc REDBDQyG y9lokXdE
  5. Establish the server where we will connect
    1EJq7dTlmK1Yx wbo0xMdzParUd l7ZQ
  6. Switch to GPRS mode to begin transmission UDP
    FK8DLtLGxMq0si
    or
    XIxWyQs5t7

To check settings adjIyOAZolD


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.