Menu
Locate and manage all your devices in one place.

Coban - GPS303

 
From $0.99 USD*
       
Pay as you go. No contract
GPS303
Visit the manufacturer website

Working Based on existing GSM/GPRS network (850/900/1800/1900Mhz) and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

Function:

  • Change Password
  • Authorization
  • Single Locating
  • Auto track continuously
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Absolute street address by SMS
  • Location based service (LBS)
  • Voice Monitor -Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • Alarm Function
  • Low battery alarm
  • External Power off alarm (Suitable for B, C and D model)
  • GPS blind Spot alert
  • SOS
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over speed alarm
  • ACC working alarm (Option, for model B, C, D)
  • Fuel alarm (Option, for model C, D)
  • Cut off the Oil and Power System (Option, for model C, D)
  • Arm
  • Silent Mode
  • DISARM
  • Door alarm (Option for model C and D)
  • ACC alarm (Optional for model B,C,D )
  • Shock Sensor alarm
  • Alarm without GSM network service
  • Check the Vehicle State
  • Reset Hardware
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • No sleep mode
  • Set up Terminal (local) Time
  • TCP / UDP Switch
  • Configure parameters by USB
  • GPRS setting
  • Setting up APN
  • GPRS User ID and password Setup
  • IP and port setup
  • Less GPRS traffic
  • Modes Switch between “SMS” and “GPRS”
  • Set up monitor center number

ConfiguraciĆ³n GPS303

Country Operator APN User Password

To set 9qVFSG you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial setting from the device

  1. Factory reset
    GDtfVBFDPb6
  2. Set the time zone UTC-0
    ESJV gvAJfthJ0d h
  3. Set up our operator APN
    u0y1mKL5b oHs3GvN
  4. Set the username and password of APN operator
    MiFekcO3 ecRiVrzl NKI219aV
  5. Establish the server where we will connect
    jRzPrEYKyur58 HMEsWFctQIet5 EOoF
  6. Switch to GPRS mode to begin transmission UDP
    tnYCCIxK3XrrYD
    or
    stLEVjg4lM

To check settings bILCISR7W8Q

To enable the status of the fuel sensor or improve the transmission of the status of the digital sensors MIuZRT3XtbICmJ qv


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.