Menu
Locate and manage all your devices in one place.

GOTOP - VT-380A

 
Start Your FreeMonth
       
From $0.99 USD*Month/Device
       
Pay as you go. No contract
VT-380A
Visit the manufacturer website
Introduction
VT380A is a GPS/GPRS based tracking device specially developed and designed for vehicle real-time tracking and fleet management. VT380A has inbuilt GPS module to obtain accurate position data and utilizes its GSM capability to send the position data to a specified mobile phone or server base for tracking and fleet management. With internal memory, VT380A can store GPS coordinates when there is no GPRS connection or at a specified interval requested by the user. One optional feature of VT380A is that a microphone can be linked out to be hidden somewhere inside the vehicle for listening to the cabin.
 
Driver ID Identify Solution
Each authorized driver takes a RFID inductive card; the card-reader is connected to the tracker via USB cable. When the inductive card is close enough to the car, the card-reader will get the identity (ID) number from the inductive card, and send this ID No. to the server platform via GPRS, and then the administrator can monitor the driver’s ID and his name from platform. Unauthorized driver without RFID inductive card couldn’t turn on the vehicle engine.
 
Car Alarm Solution:
When the inductive card held by the driver is far away the car, the tracker will ARM, and it will cut off the oil & Power of the car automatically. Then even if the driver forgets to bring key with him, the car will be armed for anti-theft.
When the inductive card is close to the car, the tracker will disarm, and the oil and power of the car will be resumed automatically, then you can drive the car normally.
When the tracker in Arm state, tracker will send alarm message both to your phone and to the server platform

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port
    d.plaspy.com 54.85.159.138 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.