Menu
Locate and manage all your devices in one place.

GOTOP - VT-391

 
Start Your FreeMonth
       
From $0.99 USD*Month/Device
       
Pay as you go. No contract
VT-391
Visit the manufacturer website
Introduction
GPS tracker VT391 is equipped with WIFI module, using the tracker as wireless devices and send back the data via WIFI transmitting. Also this tracker can support camera (location &driving information log on picture). Bidirectional communication; support max 64GB SD card for storing data and pictures; 4 A/D connectors for multi fuel sensor monitoring; support unique active RFID for automatic anti-theft and driver identification; support OTA (updating online) for upgrading new firmware by GPRS if needed; with harsh braking & acceleration alarm and accident alarm; and many useful functions and extensibility for fleet management and vehicle security purpose.
  
Feature
WIFI Transmitting
RFID Driver Identification
Photo taken and online Image Monitoring
Support max 64G SD card
Two way communications listen and speak
4 fuel sensor monitoring
Harsh braking and harsh acceleration alarm
 
Tracking via SMS/GPRS/WIFI (TCP/UDP)
Tracking by distance or time interval
ARM9 high speed microcontroller
OTA function
Remote control engine
Mileage report
Built-in motion sensor for power saving
Check the car’s real physical address
Locate by SMS with Google map's link
SOS Alert, Movement Alert, Geo-Fence Alert, over-speed Alert.
External Power cut Alarm
Fuel steal/leakage alert (Optional)
Accident alarm (Optional)
Monitor temperature (optional)
I/O: 5 digital inputs, 5 outputs, 4 analog inputs, 1 camera port, 1RS232 port, 1 SD card slot

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port
    d.plaspy.com 54.85.159.138 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.