Menu
Locate and manage all your devices in one place.

Generic - GPS 303

 
Start Your FreeMonth
       
From $0.99 USD*Month/Device
       
Pay as you go. No contract
GPS 303
Visit the manufacturer website

Working Based on existing GSM/GPRS network (850/900/1800/1900Mhz) and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

Function:

  • Change Password
  • Authorization
  • Single Locating
  • Auto track continuously
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Absolute street address by SMS
  • Location based service (LBS)
  • Voice Monitor -Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • Alarm Function
  • Low battery alarm
  • External Power off alarm (Suitable for B, C and D model)
  • GPS blind Spot alert
  • SOS
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over speed alarm
  • ACC working alarm (Option, for model B, C, D)
  • Fuel alarm (Option, for model C, D)
  • Cut off the Oil and Power System (Option, for model C, D)
  • Arm
  • Silent Mode
  • DISARM
  • Door alarm (Option for model C and D)
  • ACC alarm (Optional for model B,C,D )
  • Shock Sensor alarm
  • Alarm without GSM network service
  • Check the Vehicle State
  • Reset Hardware
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • No sleep mode
  • Set up Terminal (local) Time
  • TCP / UDP Switch
  • Configure parameters by USB
  • GPRS setting
  • Setting up APN
  • GPRS User ID and password Setup
  • IP and port setup
  • Less GPRS traffic
  • Modes Switch between “SMS” and “GPRS”
  • Set up monitor center number

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port
    d.plaspy.com 54.85.159.138 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.