Real time tracking/SMS tracker
GSM /SMS communication or GPRS TCP/UDP connection
Support 4-frequency GSM 850/900/1800/1900 MHz(Optional)
High sensitivity, New technology and latest GPS SiRF-Star III chipset!
Excellent for fixing the position even at a weak signal status.
Work well even in areas with limited sky view like urban canyons
Compact size, and smaller than one name card. Easy to hide
Very Low power consumption
Fast Signal Acquisition
Monitors can track the person without interfering him
LIVE! Real-Time tracking!
Locate the locator holder by the mobile phone via SMS (short messaging system)
SOS button send out exact location for immediate rescue/action
Geo-fencing to restrict movement to a defined radius
No monthly service charges to be paid to the call center
C/A Code: 1.023 MHz chip rate
Channels: 20 channel all-in-view tracking
Time Accuracy: 1 ms synchronized to GPS time
Default datum: WGS-84
Reacquisition: 0.1 sec, average
Hot start: 1 sec, average
Warm start: 38 sec, average
Cold start: 42 sec, average
Altitude Limit: 18,000 meters (60,000 feet) max.
Velocity Limit: 515 meters/second (1000 knots) max.
Acceleration Limit: Less than 4g
Jerk Limit: 20 m/sec
Operating temperature: -25 ~ 65degrees
Humidity: 5% ~95% Non-condensing
Dimension: 76 * 46 * 25mm
Charging connector: DC 5V (USB port)
Standby time: more than 48 hours
LED: 3 LEDs showing Power, GPS and GSM status, And other operation status
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.
Use Plaspy with a tracker
Set the Operator APN
Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
Add a Plaspy Account on devices with the IMEI or unique ID.