The TK5000 is the pinnacle in our assortment. Time, angle, and distance-dependent position fix. Up to 50 Geo-fences at the same time. Internal memory for 100,000 waypoints, motion sensor, GPS receiver with -165dBm and more. D he GPS Tracker TK5000 is to settle in the area of professional personnel and vehicle tracking. A very sophisticated software protocol makes it possible to configure this tracker by SMS, GPRS or USB and thereby integrate into an online portal. Tracking is possible not only by time interval, but also by distance (in meters) or by change of angle (in degrees). The Comprehensive Protocol with almost 30 commands and various variables make the TK5000 for absolute allrounder. Whether for personal use or professional use, such as fleet management, surveillance, personal protection, which is TK5000 your perfect partner.
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.
Use Plaspy with a tracker
Set the Operator APN
Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
Add a Plaspy Account on devices with the IMEI or unique ID.