Menu
Locate and manage all your devices in one place.

Jointech - GP 4000

 
Start Your FreeMonth
       
From $0.99 USD*Month/Device
       
Pay as you go. No contract
GP 4000
Visit the manufacturer website

Product Description

Gp4000 is a mainstream GPS/GSM/GPRS vehicle tracking device, designed as solution for fleet management, which is a robust fleet tracking device not only allows mdt but also supports external high precision fuel sensor.

*Advantages:
Multiple useful fleet management reports
Excellent redevelopment ability
More than 10 kinds of sensors supported
Original vehicl fuel sensor

*Applications:

Vehicle tracking/monitoring
Vehicle data warehouses
Fleet management
Vehicle securities/recoveries/anti-hijacks
Mobile asset tracking/monitoring
Location based services
Taxi/bus groups

*System features:
SMS, GPRS TCP/UDP communication
Fuel consumption monitor
Blind area data re-report
Data flow control/Power Saving mode: Factory setting/Definition by use/
GPS module power off/ GPS and GSM module power off
Management time of uploading: Time/Day/Week
Remote control fuel and power break
Initiative anti-theft
GPS/Electronic Mileage statistics
Remotely listen-in
Multiple alarm functions: 17 kinds
Alarm transmission method: GPRS/ SMS /Email
Multiple fleet management reports: 8 types
Geo-fencing: 32 rectangular
Remote configuration: SMS/GPRS
Real-time tracking (time, distance interval or intelligent mode)
History data storage (43200PCS)
GPS antenna open/ short detection
Intelligent power management
Automatic self-check, recovery, protection
Power low/lost alarm, backup battery low alarm
Journey report wireless download
GPS mileage report/electronic mileage report
Build-in backup battery

*Hardware specifications:
GPS chip: SIRF Star III
GSM Module: Simcom: SIM900
Dimension: 121× 82× 29mm
Weight: 0.85kg (including standard accessories)
GPS receiver: 20-channel or above GPS receiver
Datum: WGS-84
Default baud rate: 9, 600BPS
Buffer memory: 128KB
Built-in memory: 2MB
Power source: 10 to 33V DC
Power consumption: Less than 100mA at 12V DC in operating mode
Operating temperature: -40 to +85
Communication: GSM 850/900/1800/1900MHz
Backup battery: 8.4V 400mAh Ni-MH battery
Port: Port A/Port B/Port C

Configuración GP 4000

Country Operator APN User Password

To set a Jointech device on 70XogK are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.

With the following commands through several text messages: In the example it is assumed that the device is trackerID XXXXXXXXXX which is the initial data from the device and the APN are your operator

The most common commands for these enabled devices are placed (You should consult your manual).

  1. Set the server where we will transmit and APN our operator, values Replace your operator
    D5SgxPJQZHqKW5rw44KVHbvWTFpBKatqaUaWXApafufiEjxc9gW
  2. This command is only required if your service provider requires a username and password, APN settings. Replace the values of your operator
    e54ulK5MrjHF8XAuBeUZ4Ot0W6MRuSMCnDPugkyMbx


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.