Jointech - GP 6000
Visit the manufacturer website
From $0.99 USD*
Pay as you go. No contract
SMS and GPRS, TCP/UDP communication, voice communication
Real-time tracking (time, distance interval, or intelligent mode)
Intelligent power management (4 modes)
Authorized cellphone SMS remote configuration, firmware upgrades by PC COM ports
Immobilize the vehicle in emergency
With bar-code scanner solution
Eight signal inputs (1 for pulse detecting, 1 for A/D detecting), 5 control outputs connecting to vehicle
Up to 1 month history data log storage
64 geo-fencing setup and reports
Daily mileage report, over-speed report, journey report, parking report, idling report, fatigue driving report, GSM signal monitoring report and voice call report
Configuración GP 6000
To set a Jointech device on Oj05Sv are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.
With the following commands through several text messages: In the example it is assumed that the device is trackerID XXXXXXXXXX which is the initial data from the device and the APN are your operator
The most common commands for these enabled devices are placed (You should consult your manual).
- Set the server where we will transmit and APN our operator, values Replace your operator
- This command is only required if your service provider requires a username and password, APN settings. Replace the values of your operator
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website
or user manual.