Menu
Locate and manage all your devices in one place.

Meitrack - VT-300

 
From $0.99 USD*
       
Pay as you go. No contract
VT-300
Visit the manufacturer website

VT300 is a GPS/GSM/GPRS tracking device specially developed and designed for vehicle real-time trackingand fleet management.With superior GPS and GPRS modules, VT300 has good sensitivity and stable performance. It can getaccurate GPS fix even in remote places.VT300 has the following functions and features:SMS and GPRS TCP/UDP Communication (Meiligao Protocol)

AGPS ( with GSM Base Station ID)
Track on Demand
Show Location Directly on Mobile Phone
Track by Time Interval
Track by Distance
SOS Panic Button
Movement Alarm
Geo-fencing Control
Low Battery Alarm
Speeding Alarm
GPS Blind Area Alarm (in/out)
Power-cut Alarm
Engine Cut (Stop Engine)

Configuración VT-300

Country Operator APN User Password

To set a Meitrack device on uZdI9M are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.

With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial of the device and data APN from your operator.

The most common commands for these enabled devices are placed (You should consult your manual).

  1. Set ID for VT300, last 14 IMEI digits
    udWkageAn7w6xAPtEheaRHt6HS
  2. Set APN
    K3fHs4JtLqGWTjoxQ7sYnziZky859oXOTiFRM
  3. Set IP Address and Port
    zbOYA1wdwxtL5H2xCbVUFh45NtgT1D
  4. Set Time Interval for Sending GPRS Packet 60 seconds
    gSKQUdltDPyUqWSBy
  5. Enable GPRS Tracking Function
    XiJt3qdp9ybvn


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.