Locate and manage all your devices in one place.

NVS - CH-5704

From $0.99 USD*
Pay as you go. No contract
Visit the manufacturer website

A set of the automobile terminal manufactured by ZAO KB NAVIS, operating on the signals of the GLONASS / GPS / GALILEO / SBAS SNS with data transmission via the GSM channel.

The set of the automobile terminal is intended for use as a vehicle monitoring and protection system. The terminal is developed on the basis of navigation receiver NV08C manufactured by ZAO KB NAVIS.

The terminal has an open protocol of information exchange and can be integrated into any of the existing navigation and information systems.

Configuración CH-5704

Country Operator APN User Password

To set eAG9aQ you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device

  1. Factory reset
  2. Set the time zone UTC-0
    3Wm7 grPhUOCHUX Y
  3. Set up our operator APN
    5T0VyfpNq zK6VmV8
  4. Set the username and password of APN operator
    Sht0NaHp DAOU7rzf 3d62x06V
  5. Establish the server where we will connect
    h9nLhEGiAUoEO lVbfZyt9LXpp0 ziNv
  6. Switch to GPRS mode to begin transmission UDP

To check settings I6IWu358Qkg

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.