Menu
Locate and manage all your devices in one place.

Navigil - PT220

 
Start Your FreeMonth
       
From $0.99 USD*Month/Device
       
Pay as you go. No contract
PT220
Visit the manufacturer website
PT220 Tracking the location and ensuring the safety of people
EASY TO DEPLOY

Just insert the SIM card and configure access rights and the device is ready to be used. The Navigil PT220 is powered by its internal battery and can be recharged with the wall charger or even from any computer using the USB cable. Just drop it in your pocket, briefcase or backpack and you are ready to track!

INTELLIGENCE SOFTWARE

PT220 can be configured to automatic GPRS or manual SMS operation. In GPRS mode PT220 will automatically send location reports periodically or at specified events such as geofence breaches. In SMS profile location can be queried with a phone call or SMS message.

LONG BATTERY LIFE

Due to low-power sleep modes of the hardware and intelligent power management of the firmware, the Navigil PT220 can survive long periods without charging while still maintaining periodic reporting. Wakeup from a power saving mode can be triggered by a scheduled event, motion or an external input.

 


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port
    d.plaspy.com 54.85.159.138 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.