Menu
Locate and manage all your devices in one place.

Noran - NR008

 
From $0.99 USD*
       
Pay as you go. No contract
NR008
Visit the manufacturer website

Product Description

NR008 is automobile GPS tracking device, it works with our Auto GPS Tracking system perfectly.

Application:

·Fleet management

·Vehicle rental

·Anti-theft of Vehicle


BRIEF FUNCTION OF AUTOMOBILE GPS TRACKING DEVICE

1. Engine remote control: You can stop oil supply by SMS/ GPRS remotely

2. Over-speed alarm: Both software and authorized mobile number will receive alarm when target is over a specified speed. This speed limitation should be set in advance.

3. SOS Function: Alarm will be sent to software and authorized number when SOS is pressed once emergency.

4. Geo-fence

5. Movement alert: Send a movement alert to the user when it begins to move.

6. Assistant alarm: compatible with original car’s anti-theft system

7. Voice monitoring: Use the authorized number to call the device, you will hear the voice in the vehicle.

8. Anti- dismantle: It will alarm when lose the power of car

Specification

· GSM Module:SIMCOM

· Frequency: 850/900/1800/1900Mhz and 2100MHz(3G)

· Max RF output : 33.0dBm±2dBm: 33.0dBm±2dB

· Dynamic input range : -15 ~ -102dBm -15 ~ -102dBm

· Frequency stabilities: >2.5ppm

· RMS Deviation: ≤5deg

· GPS chipset: SIRF Star

· Channels: 20

· Capture time: 0.1 sec., average

· Hot boot: 2 sec., average

· Warm boot: 38 sec., average

· Cold boot: 44 sec., average

· Height limit: 18000 m

· Speed limit: 515 m/s

Configuración NR008

Country Operator APN User Password

To set 7yoXEJ you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is RWTBFn which is the initial data from the device
you can get the device Id, sending the command to check the device status, the device Id is the first word normally starts with NR

  1. Set up our operator APN
    JU3EOfVfHTe7ZgWLiujvE1dypUjlvknAMyfrD
  2. Establish the server where we will connect
    MiTy4xCxvqphXjyy6tS1FY35uugpeu
  3. Switch to GPRS mode
    lBpIWLP7KDbA4

To check settings n4EXAzMQENz
Device Id, APN, server, port, GPRS status (1), GPRS connection status (1), GSM signal (1-31)


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.