Menu
Locate and manage all your devices in one place.

OKB Tehnoavtomatika - MTA-12

 
Start Your FreeMonth
       
From $0.99 USD*Month/Device
       
Pay as you go. No contract
MTA-12
Visit the manufacturer website

Tracking System MTA-12-CAN (FMS) is the finished product of the company "OKB Tehnoavtomatika".

The device has a flexible system configuration according to the specific problems to be solved. The particular configuration of the device is designed taking into account the specifics of modern transport and allows you to receive additional information on the functioning of the machine (CAN). The device allows  monitoring of different vehicles including specialized equipment.

Features of the device require the notification of the owner using the internet (GPRS), 
by means of sending an SMS to a specified number 
or monitoring by a service control center.

SPECIFICATIONS

The device carries out fuel control and ignition control of the state.
The channel tie with DC - GSM 900/1800 
- sending / receiving data to DC, using data transmission; 
- sending / receiving data on the DC using GPRS; 
- sending / receiving data on DC using SMS; 
- receiving from the subscriber's SMS-messages; 
- handover of SMS-messages.

Determination of coordinates: 50-channel high-sensitivity GPS-receiver. Power supplyDC from 9V to 68B, and built-in rechargeable battery. Current consumption in active mode - no more than 180mA at a voltage of 12V. The current consumption in standby mode - no more than 65mA, the supply voltage of 12V. The current consumption in sleep mode - no more than 20 mA, the supply voltage of 12V. Built-in rechargeable battery with a capacity of up to 600 mA / h. The average time of standby for at least 6 hours. Time of technical readiness of the device for - no more than 3 minutes. Enclosure IP30. Overall dimensions of the device is not more than 90 × 65 × 30 mm. The weight of device 200 g


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port
    d.plaspy.com 54.85.159.138 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.