The GL500 is a powerful GPS tracker designed for fixed asset tracking applications. It is powered by two user replaceable CR123A lithium batteries. Configuration allows it to wake up on a preset schedule to check if it needs to shift from dormant to active status and/or send update of its current location, then returning to a dormant state. Optimally configured, it will operate autonomously for 1000 days. Its built-in 3-axis accelerometer allows the GL500 to detect asset movement and transmit an alert message. The integrated @Track interface protocol allows the GL500 to communicate with a customer mobile phone or a backend server via GPRS/SMS and transfer reports of GPS position, etc. System integrators can easily incorporate the GL500 into existing tracking systems based on this full featured protocol.
Low power consumption, long standby time for more than 1000 days
Powered by two user replaceable lithium batteries (CR123A)
Internal u-blox chipset
Quad band GSM/GPRS 850/900/1800/1900 MHz
Embedded @Track protocol
Internal 3-axis accelerometer for motion detection
To set cqfbVG you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.
Begin with the configuration QFMM38waXzb1AoRqCXAzdtZuwXY
Set the time zone UTC-0 7DMNez8ulVKwSUq1RvfOFiSZ0GWROJAE1
Set up our operator APN 0ADyX88R3w04GAZD9BZBA14lKUATJEAbUB6Jo1ixm2aHjWXY6Q
Establish the server where we will connect NgepTtxhnnSCJa1mS1y8SS1hcJ5lkikEV2E0wOlmknifeoPlyAw5HKQ4p7MKyL7EDNrQWBzE
Define how often will transmit position 60 seconds. PLXpuVDx3Uxkvp7LmJLzBbyYqdcQ79OxKsq5wlJT4ZRdYWTXQfoN
Activate notification by SOS button input 2 YOGmN9FcoD8oHywYjFDQYHdlYIawCx6lW3pvUry