The GL500 is a powerful GPS tracker designed for fixed asset tracking applications. It is powered by two user replaceable CR123A lithium batteries. Configuration allows it to wake up on a preset schedule to check if it needs to shift from dormant to active status and/or send update of its current location, then returning to a dormant state. Optimally configured, it will operate autonomously for 1000 days. Its built-in 3-axis accelerometer allows the GL500 to detect asset movement and transmit an alert message. The integrated @Track interface protocol allows the GL500 to communicate with a customer mobile phone or a backend server via GPRS/SMS and transfer reports of GPS position, etc. System integrators can easily incorporate the GL500 into existing tracking systems based on this full featured protocol.
Low power consumption, long standby time for more than 1000 days
Powered by two user replaceable lithium batteries (CR123A)
Internal u-blox chipset
Quad band GSM/GPRS 850/900/1800/1900 MHz
Embedded @Track protocol
Internal 3-axis accelerometer for motion detection
To set 7Of3r8 you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.
Begin with the configuration w6Aj5y57IcLQSQmHnshsxu4rDYF
Set the time zone UTC-0 xt2LsRAF3HLtU8CcSNhfa3BywnTvjAZNx
Set up our operator APN f5YrHOzobqb3uwxlIdY37QlH22T5Aaf9wxCEJB7M5t4So0Rsw4
Establish the server where we will connect 8jUX8r3r9SbTv3hdgqIuOYx6qMfCTT3pUu6Z84XGq3MXfGKWrfJCHfGkwYqvL0XqZw8B7Ifl
Define how often will transmit position 60 seconds. TCEVLaajCJVxJ1izoWmjNl4zfg8tHJZi9htEauYW8GtBfkghNIWl
Activate notification by SOS button input 2 ZutdnPURzO44oAKcG6ttcGgM8NVScCllJFAvPTK