Menu
Locate and manage all your devices in one place.

QuecLink - GL505

 
From $0.99 USD*
       
Pay as you go. No contract
GL505
Visit the manufacturer website

The GL505 is a powerful waterproof GPS tracker designed for fixed asset tracking applications. It is powered by two user replaceable CR123A lithium batteries. Configuration allows it to wake up on a preset schedule to check if it needs to shift from dormant to active status and/or send update of its current location, then returning to a dormant state. Optimally configured, it will operate autonomously for 1000 days. Its built-in 3-axis accelerometer allows the GL505 to detect asset movement and transmit an alert message. The integrated @Track interface protocol allows the GL505 to communicate with a customer mobile phone or a backend server via GPRS/SMS and transfer reports of GPS position, etc. System integrators can easily incorporate the GL505 into existing tracking systems based on this full featured protocol.

Features: 
  • Waterproof, IPX7 compliant
  • Low power consumption, long standby time for more than 1000 days
  • Powered by two user replaceable lithium batteries (CR123A)
  • Internal u-blox chipset
  • Quad band GSM/GPRS 850/900/1800/1900 MHz
  • Embedded @Track protocol
  • Internal 3-axis accelerometer for motion detection

  • Internal GSM antenna
  • Internal GPS antenna
  • CE/FCC certified

Configuración GL505

Country Operator APN User Password

To set 1XvBmC you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.

  1. Begin with the configuration
    wKXCWyokINCWTXASgaGeeaH0xLj
  2. Set the time zone UTC-0
    E2kuty0UxXPnnOycZD02e7BxjK6djvuNi
  3. Set up our operator APN
    XJyCh4wn8qMkjRjlYdc2XarZfWsLEXwnp2CT8R59a3ZRxiVdEF
  4. Establish the server where we will connect
    O4CrM8yEfXSwLHqFO7yVIROeGkQVXZtPp41dOAQ97g175fIdmUBASSz6pillrdrFoDHQPM0N
  5. Define how often will transmit position 60 seconds.
    rzYlZRjkcxsDYs7WF4yqZpRdzvS2Y1NadxTd4NhY8AJ4vnq5GuLV
  6. Activate notification by SOS button input 2
    hmST77bYgLLkil4i5rOPmHicbdAZl7BPH90KVW4

 


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.