Menu
Locate and manage all your devices in one place.

QuecLink - GMT100

 
Start Your FreeMonth
       
From $0.99 USD*Month/Device
       
Pay as you go. No contract
GMT100
Visit the manufacturer website

The GMT100 is a water resistant GPS tracker designed for applications requiring low current drain such as motorcycles and boats. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GMT100's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection and extends battery life through sophisticated power management algorithms. Further reduction in current drain is achieved by configuring alternative recharge schemes for the internal battery. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.


Features: 
  • Wide operating voltage 8V to 32V DC
  • Internal u-blox chipset
  • Low power consumption, long standby time with internal battery
  • Quad band GSM/GPRS 850/900/1800/1900 MHz
  • Embedded full featured @Track protocol
  • Multiple I/O interfaces for monitoring and control
  • Internal 3-axis accelerometer for power conservation and motion detection
  • Power consumption can be fully configured
  • Three working power modes
  • Water resistant, IPX6 compliant
  • CE/FCC certified 

 

Configuración GMT100

Country Operator APN User Password

To set TkFCOS you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.

  1. Begin with the configuration
    pcxHLe7YnrLlctyvsJRmXy7cNIk5
  2. Set the time zone UTC-0
    fiJlavLxkMxo9fgK3nbtbqlqXRKPeAHvZq
  3. Set up our operator APN
    yFTh6TpVbfy64B8jFw6uc5bZBQq651EMBaPcZEzOJMvOMHRaeph
  4. Establish the server where we will connect
    LTS2I6h5oUTTKjAOMovthKbOu5XhPGVv8sgbEQYAGIrXrzbxjuAydPKB2EINjAqi8hVcDiK6Q
  5. Define how often will transmit position 60 seconds.
    unYcDg5dj7eFgSshfjAHKaFcIYKe8uBkEitmviyhMtADLccPm4h9J
  6. Activate notification by SOS button input 2
    IlOr3o4fpntakal4dwfKA7slQJMN49PbPU6lxsWy

 


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.