Menu
Locate and manage all your devices in one place.

QuecLink - GV300

 
From $0.99 USD*
       
Pay as you go. No contract
GV300
Visit the manufacturer website

The GV300 is a compact GPS tracker designed for a wide variety of vehicle tracking applications. It has multiple I/O interfaces that can be used for monitoring or controlling external devices. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GV300's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection and extends battery life through sophisticated power management algorithms. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, driving behavior, low battery and scheduled GPS position.


Features: 
  • Wide operating voltage range 8V to 32V DC
  • Internal u-blox chipset
  • Low power consumption, long standby time with internal battery
  • Quad band GSM/GPRS 850/900/1800/1900 MHz
  • Embedded full featured @Track protocol
  • Multiple I/O interfaces for monitoring and control
  • Internal 3-axis accelerometer supporting driving behavior monitoring, power conservation and motion detection
  • Internal GSM antenna

  • Internal and external GPS antenna
  • CE/FCC/E-Mark certified

 

Configuración GV300

Country Operator APN User Password

To set dZHRnx you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.

  1. Reset to factory settings
    dkNH0wj0HuVLbbKbLRRnMrPkSxx
  2. Set the time zone UTC-0
    4fCLNj7u6kqjuyQsFIuWRp4uXaGimo62j
  3. Set up our operator APN
    xtttbnxBEI1Uq3OuJvXTNYubNgC5aSEEs1DNke2ikxGCot7tMS
  4. Establish the server where we will connect
    sA4I6IJzpaTxNZlVbNKnZYnqg43NVIGj37zK8yGmBCOWT0N1lC9lBLOUXOmBP5ehUt3PjbWm
  5. Define how often will transmit position 60 seconds.
    HilWJRXprBlSJfistfwuLEXGirCj67RKpWddj1KG16UNULXyLLgEombCKfxcO
  6. Enable digital input 2
    BtaIBY8Sg5k2kwDxmzzBJp3ztZSrweiTtHQVnkzpOR877sNT91
  7. Activate notification by SOS button input 2
    HI4KJW0lYmFQgBWRIcfsJB9Jx2r51BM8s4XZYj8

 


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.