Menu
Locate and manage all your devices in one place.

Sanav - CT-58

 
From $0.99 USD*
       
Pay as you go. No contract
CT-58
Visit the manufacturer website

CT-58 is a mini GPS tracker available at the current market and is able to apply to many tracking purposes such as vehicle, container or asset tracking. CT-58 is also equipped with high sensitive vibration sensor which could reflect the real position of the surrounding immediately as being activated. CT-58 will be the best helper for you to detect your most valuable properties.


Features:
  • The build-in vibration sensor will detect the movement of the CT-58.
  • When the movement occurs, the CT-58 will send out reports.
  • The external panic button (option) can be connected to CT-58.
  • When the panic button is pressed, CT-58 will send out SOS report.
  • Improved the GPS and GSM receptions.
  • Compact and rubust enclosure.
Specification:
Electrics Data
Frequency GSM 850/900/1800/1900 MHz
GPS Receiver Acquisition time Reacquisition < 2sec.
Cold < 60sec. TTFF(Time To First Fix)
Warm < 35sec. TTFF
Hot < 10sec. TTFF
TTFF Accuracy Position 10 meters RMS without SA
Velocity 0,1m/s without SA
Power
Battery Power 3.7V DC Li-Polyma Battery,1500mAh
External Power 6V DC
Battery Life 70-75 hours (1 hour per data), after full charged.(estimate)
Environmental Conditions
Operating Temperature -10°C to +65°C
Storage Temperature -20°C to +70°C
Relative Humidity 5% to 95 %, non-condensing
Mechanics Data
Size 8.4(L) x 6.4(W) x 2.3(H) cm
Weight 98g with battery

 

 

Configuración CT-58

Country Operator APN User Password

To set P3REXj you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the default ID is “username” and device password is 0000 which is the initial data from the device

  1. Factory reset
    e0Ho0nLspgDivXpx1
  2. Set up our operator APN
    UUMm96U6WAKMTPxQzOgKitdxl4leTIM0O9JEFeGlkwX
  3. Establish the server where we will connect
    wsgkjNDZwcRal0YAFU0nNxT8UFsLVI5kwVrEE
  4. Set up Route for Data Transmission
    EngroQJT5vSkXeW5Bwhe
  5. Set Time interval to 60 seconds
    TCQPtaY6iiNreBQtIJ8YiQdf2


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.