Menu
Locate and manage all your devices in one place.

TZone - TZ-AVL02

 
From $0.99 USD*
       
Pay as you go. No contract
TZ-AVL02
Visit the manufacturer website

Description:
AVL02 is a GPS/GSM/GPRS tracking device which is specially developed and designed for vehicle real-time tracking and security. With superior GPS and GPRS modules, AVL02 has good sensitivity and stable performance. It can get accurate GPS fix even in remote places.

Specifications:  

Feature

Characteristics

Dimension

108mm*58mm*28mm

N.W

140g

Exterior Power Supply

DC 9V – 36V

Inner lithium battery

DC 3.6V-4.2V

Standby time

About 72 hours

Work  time

About 12 hours

Exterior GSM antenna

Receive GSM signal better  

Exterior GPS antenna

Receive GPS signal better  

Operating Temperature Range

-20℃ to +60℃

Air pressure

860Kpa –1060Kpa

Humidity

Up to 75% non-codensing

Position accuracy

10 –15 meters

GSM chip

support 4 frequency GSM 850/900/1800 /1900MHZ

GPS chip

super-sensitivity and high accuracy 

Hot start

1 sec, average

Warm start

38 sec, average

Cold start

42 sec, average

LED

3 LEDs indicates GSM signal, GPS signal, power on and GSM module.

Button(not in the basic version)

1 buttons, report location

I/O Port

1 SOS Button,2 digital input( positivel input), 2 digital output,1 analog input

 

Configuración TZ-AVL02

Country Operator APN User Password

To set Plaspy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Set up our operator APN
    ItcgL0mcvPlydicckK97bNRJwSCpSjsAgJ7ymV
  2. Define how often will transmit to our example 120 seconds
    PaL9XdKG8164wZuJIpCW
  3. Establish the server where we will connect
    tx7DtGCybGugK81Yd5cTt2x7JLgkRUkn0
  4. Activate the GPRS mode
    Tl09A4hkcgGfGq

 


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.