·Over-speed alarm, Low power alarm, Geo-fence alarm.
·Roaming feature to save cost.
·Control or detect the car doors/engine on/off .
·Cut off the engine power Gradually and safely when in urgency.
·GPRS(TCP/UDP), SMS Support.
·OTA, upgrade the firmware via GPRS.
·Backup battery, Send a data every minute,support 12 hours working time.
Special Features: ·Support commands to device via GPRS. ·SMS Link for google map. ·Sending GPRS data to IP or DNS. ·Mileage calculation. ·32Mb Flash Memory. ·Fuel/oil level detection. ·Temperature sensors(optional) . ·With Microphone and listen-in function(Two-way conversation).
4 digital inputs (2 negative inputs, 2 positivel inputs ), 2 digital outputs, 2 analog inputs
To set Plaspy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR
Set up our operator APN Zl1hzCb8wkFi9d6vhrS7jJvBrTJj6kM7scFAQv
Define how often will transmit to our example 120 seconds wzHXaveUtMY4mpB6QxyK
Establish the server where we will connect 2LkIXRr8GvoT5KAbpQz00g32CLXIzhY5e