Menu
Locate and manage all your devices in one place.

TZone - TZ-AVL11

 
From $0.99 USD*
       
Pay as you go. No contract
TZ-AVL11
Visit the manufacturer website

Description:

  1. Built-in 2.4G RFID receiver.

  2. Built-in antenna and battery.

  3. Support GPRS(TCP/UDP), SMS, tracked by software/cell phone.

  4. Support mini USB port to update firmware.

  5. Low power consumption.

  6. With Microphone and listen-in function.

  7. With 32Mbit memory, can store about 16000 PCS data.

  8. With Temperature sensor and control or detect car door/engine on/off.       

  9. GPRS alarm function:Over-speed /Geo-fence /Low battery /Power Cut/Motion/SOS.

    .
Specifications:  

Feature


Characteristics

Dimension


122mm*81mm*30.8mm

Exterior Power Supply


DC 11V -- 36V


USB charge


5V

Inner lithium battery


DC 3.6V -- 4.2V/4500mh


Built-in GSM antenna


Receive GSM Signal better


Built-in GPS antenna


Receive GPS signal better


Power Consumption 

when exterior voltage is 12V


Active mode(avg.) < 50mA

Sleep mode      < 5mA


Charging time


About 6 hours can be full


Air pressure


860Kpa --1060Kpa


Humidity


Up to 75% non-condensing


Position accuracy


10 --15 meters


GSM chip


SIMCOM, 4 Frequency GSM 850/ 900/1800 /1900MHZ is optional)


GPS chip


Super-sensitivity and high accuracy


LED


3 LEDs indicates GSM signal, GPS signal, and change

 

Configuración TZ-AVL11

Country Operator APN User Password

To set Plaspy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Set up our operator APN
    7q53c5q3T5399v5dskfL4lrnExQBsdftbHvNDA
  2. Define how often will transmit to our example 120 seconds
    rJDPWTFXFv8cATL4dPZP
  3. Establish the server where we will connect
    ac6hSmP9BSisKUz72W8SzoooLzZJh19rZ
  4. Activate the GPRS mode
    uLvxRWcMGbJS1S

 


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.