Description: Temperature monitor TZ-LCD070 is secondary development based on WinCE6.0 operating system,and its visual display through RS485 to receive temperature data from sensor.
The Temperature monitor must work with rfid reader and temperature tag and then send data by 2.4G RF wireless transmission technology.
Four-wire resistive touch screen.
Support SD and MMC card
12~24V (recommend 12V).
A USB Device interface.
Max. reader connected:
Can connect 32pcs reader(one reader can connect 20pcs tag)
Wide temp type:
64K colors or 260K colors.
Temperature working range:
Humidity working range:
Windows CE 6.0 R3.
working life>25000 h.
To set Plaspy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR
Set up our operator APN 9yCCWSYX9hAd7abw6zxEBOAgKQeBitVU19bJ6L
Define how often will transmit to our example 120 seconds vrLlE1K6FVjBElAlmSqV
Establish the server where we will connect Hmd7W0kF45AeIVtOquyg2FxWzQLpm88S0