Locate and manage all your devices in one place.

Telic - SBC3 CAN

From $0.99 USD*
Pay as you go. No contract
Visit the manufacturer website

Telic SBC3 CAN

The robust unit for demanding telematics applications

The highly versatile SBC3 CAN devices have been developed for demanding telematics applications requiring access to a variety of vehicle interfaces, including serial interfaces (RS232), 1-wire and CAN bus. With his

Robust housing, the device is also suitable for use in harsh environments. The SBC3 CAN is available with internal or external antennas. The version with integrated antennas is also available as a variant with a 4 Ah battery.

Configuración SBC3 CAN

Country Operator APN User Password

To set WCZq9H you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device and the APN are to APN_OPERADOR

  1. Factory reset
  2. Set the time zone UTC-0
    eEU2 GmdVd5P2Hp v
  3. Set up our operator APN
    jbf4TuojE ERGtuWC
  4. Set the username and password of APN operator
    1ESf0t8T gaVZIRhs wXp29uih
  5. Establish the server where we will connect
    wpdFfkvt7G7ZK lTazauFDrVl93 GaPC
  6. Switch to GPRS mode to begin transmission UDP

To check settings fPxzfukG2IW

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.