• Send data to two servers simultaneously.
• 3-Axis Digital Accelerometer movement status monitoring.
• Firmware upgrade by OTA.
• Support DC 9v --50v , over-voltage protection.
• Send commands to GPS trackers via GPRS or SMS.
• Send GPRS data to IP or domain name.
• Google map link sent via SMS.
• Voice monitoring function with microphone.
• user defined settings on I/O ports: digital input, digital output.
To see the traces of AT05, please.
Description for GPS tracking
• GSM: Quad-band: GSM850 / E-GSM900 / DCS1800 / PCS1900.
• u-blox GPS module with high GPS positioning accuracy.
• SMS, GPRS TCP / UDP communications.
• Real time tracking and history data traces tracking.
• Track by cell phone or web based tracking software.
• Real-time tracking (Time, Distance Interval or Intelligent Mode).
• Alarm types: Over-speed, Low power, tremble, Parking, SOS,exterior power off, Internal power low alarm.
• Control car doors close/open, Detect the status of engine on/off.
• Intelligent power management: normal, sleep, deep sleep.
• flash memory for data storage in GSM blind area.
•Sleep mode for Saving Power and GPRS traffic.
• Backup battery: 300 mAh Li Polymer battery.
• Geo-fencing reports: into-Geo-fence; Out Geo-fence.
• Motion sensor for vehicle motion detections.
• Different GPRS data string sending intervals:
• sending data at certain interval in engine on or tremble state;
• sending data at the other interval in engine off or still state.
To set ZfdJOq you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000
Factory reset qIWSmYLMedCn
Set up our operator APN JoajdNpNClOkMAD0Y9IHmKokJsMtXcDNjQtc8s
Establish the server where we will connect i278YJOxklRACt2iz990ZvB60jiBA6Ql
Set ACK ucITx1AIylMwoV
Data sending mode (60 seconds) 2qbPKoweWWHlbWaTUBa