Locate and manage all your devices in one place.

Totemtech - AT05

From $0.99 USD*
Pay as you go. No contract
Visit the manufacturer website

    • Send data to two servers simultaneously.
    • 3-Axis Digital Accelerometer movement status monitoring.
    • Firmware upgrade by OTA.
    • Support DC 9v --50v , over-voltage protection.
    • Send commands to GPS trackers via GPRS or SMS.
    • Send GPRS data to IP or domain name.
    • Google map link sent via SMS.
    • Voice monitoring function with microphone.
    • user defined settings on I/O ports: digital input, digital output.
    To see the traces of AT05, please.

    Description for GPS tracking

    • GSM: Quad-band: GSM850 / E-GSM900 / DCS1800 / PCS1900.
    • u-blox GPS module with high GPS positioning accuracy.
    • SMS, GPRS TCP / UDP communications.
    • Real time tracking and history data traces tracking.
    • Track by cell phone or web based tracking software.
    • Real-time tracking (Time, Distance Interval or Intelligent Mode).
    • Alarm types: Over-speed, Low power, tremble, Parking, SOS,exterior power off, Internal power low alarm.
    • Control car doors close/open, Detect the status of engine on/off.
    • Intelligent power management: normal, sleep, deep sleep.
    • flash memory for data storage in GSM blind area.

    •Sleep mode for Saving Power and GPRS traffic. 
    • Backup battery: 300 mAh Li Polymer battery.
    • Geo-fencing reports: into-Geo-fence; Out Geo-fence.
    • Motion sensor for vehicle motion detections.
    • Different GPRS data string sending intervals:
    • sending data at certain interval in engine on or tremble state;
    • sending data at the other interval in engine off or still state.




Configuración AT05

Country Operator APN User Password

To set vgtP09 you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000

  1. Factory reset
  2. Set up our operator APN
  3. Establish the server where we will connect
  4. Set ACK
  5. Data sending mode (60 seconds)

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.