Menu
Locate and manage all your devices in one place.

V-SUN - V-680

 
From $0.99 USD*
       
Pay as you go. No contract
V-680
Visit the manufacturer website
Functions
* Call (default), two-way call
* Auto-answer
* Low cell alarm
* Mode shifting
* SOS Emergency Alarm
* Server shifting
* Automatic time calibration
* Remote monitoring
Hardware
* Charging voltage:110-220V
* Working temperature -20°-—65°
* Humidity: 5%-95%
* Limited working temperature:-30°C -- -40°C, +80°C-- +85°C
* Storing temperature:-45°C -- +90°C
* Start-up time, hot start: <1.5s Warm start: <34s Cold start: <35s(Autonomous)
* Accurate positioning: 3.0 m 2D-RMS , DGPS: 2.5 m
* Speed Positioning: 0.1m/s, DGPS:0.05m/s
* Power consumption: standby 48mA(Depending on the system network state and the user’ s operation method)
* Charging port: DC 5V 3A

Configuración V-680

Country Operator APN User Password

To set aVRryS you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial data from the device and the APN are to APN_OPERATOR

  1. Factory reset
    KNpjo5A7cpnpu
  2. Set up our operator APN
    kvGJc5zBgjfXHyjjnVNcJFJSJKYKaYjJxYQma
  3. Establish the server where we will connect
    AwJXtPKK43vltSeEC1emy9SgolHAVk
  4. Define how often will transmit to our example 120 seconds
    th6JniDEZz8IPQnjr
    GEFvgvAmAensIIJzU
  5. Enable GPRS mode
    B3F4B5Q
  6. Enable GPS mode
    yMw5hnD


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.