Menu
Locate and manage all your devices in one place.

Xexun - XT008

 
From $0.99 USD*
       
Pay as you go. No contract
XT008
Visit the manufacturer website

Function of gps traker:

 Rreal time tracking.
 interval tracking
 real street address replying
 track when no GPS signal.
 GPS+LBS tracking
 tracks playback.
 geofence alert
 movement alert
 overspeed alert
 Low power alert
 FOTA(firmware by the air)
 Listen in two-way communication
 vibration alert
 SOS alert
 Alert when cutting off the GPS antenna
 Alert then cutting off the external power
 Alert when switching on the ignition illegally
 Dual SIM,shift to the workable GSM operator automatially when the other GSM operator is not working or an roaming area
SD card (optional)
RFID (optional)
Remote the engine. (optional)
 Fuel monitoring,temperature monitoring( optional)                                                                                                   
camera (optional).   

 

SpecificationS of gps tracker

1-Oil Tester-for option.To test the oil level of oil tank of vehicles. 
2-Report the battery strength 
3-Temperature sensor

Configuración XT008

Country Operator APN User Password

To set a Xexun device on LWZbym, you must configure it as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device.

  1. Begin with the configuration
    yHvE5XuXlkv
  2. Set up our operator APN
    INe3v1hcx 0bd2gyx
  3. Set the username and password of our APN.
    TZZK8ECx7C1RA R3sy9dDa
    qIzOMmNKdmVD9vT UzhaFpMQ
  4. Establish the server where we will connect
    2zEQZxK798IHI 5aNogDeRdoFLX AN5H
  5. Set the device to send data
    MJzKL4RNNeUKLZ
  6. How often we want to establish the position is sent every 60 seconds
    bOGbzXBHdTC5zlF


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.