Menu
Locate and manage all your devices in one place.

Xexun - XT008

 
From $0.99 USD*
       
Pay as you go. No contract
XT008
Visit the manufacturer website

Function of gps traker:

 Rreal time tracking.
 interval tracking
 real street address replying
 track when no GPS signal.
 GPS+LBS tracking
 tracks playback.
 geofence alert
 movement alert
 overspeed alert
 Low power alert
 FOTA(firmware by the air)
 Listen in two-way communication
 vibration alert
 SOS alert
 Alert when cutting off the GPS antenna
 Alert then cutting off the external power
 Alert when switching on the ignition illegally
 Dual SIM,shift to the workable GSM operator automatially when the other GSM operator is not working or an roaming area
SD card (optional)
RFID (optional)
Remote the engine. (optional)
 Fuel monitoring,temperature monitoring( optional)                                                                                                   
camera (optional).   

 

SpecificationS of gps tracker

1-Oil Tester-for option.To test the oil level of oil tank of vehicles. 
2-Report the battery strength 
3-Temperature sensor

Configuración XT008

Country Operator APN User Password

To set a Xexun device on WOCV9J, you must configure it as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device.

  1. Begin with the configuration
    9fAw7jbQkfV
  2. Set up our operator APN
    X9yoBPrrw OhzSbdg
  3. Set the username and password of our APN.
    7WCeagAltFnyx cQd9Uzr1
    38Z0i5TGH8vsOac syEfqvEq
  4. Establish the server where we will connect
    Ek4fgWC97rv1G C5n6z0JrCFe8f vS4T
  5. Set the device to send data
    5WyjWN0ZRT470F
  6. How often we want to establish the position is sent every 60 seconds
    a2jGWCmkmpQhkfW


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.