Locate and manage all your devices in one place.

Xexun - XT009

From $0.99 USD*
Pay as you go. No contract
Visit the manufacturer website

GPS motorcycle tracker,XT-009 GPS / GSM tracking device is a built-in GPS and GSM / GPRS module remote location equipment for vehicles. It is  a small, precision 
high, remote location tracking device. Based on the Global Positioning System satellites, under dynamic conditions it provides accurate positioning information,personal remote positioning 
It transmits the longitude and latitude coordinate to authorized cell phone, sends data through the GPRS channel to the service platform for real-time tracking.detail information,

1.Waterproof IP67

2.Build in GSM/GSM antenna, as small as our TK102, easy to hide to motorcycle. 

3. DC6~36V car/motorcycle battery supported

4.cellent for fixing the position even at a weak signal status.

5.Very Low power consumption, long time battery life (120hours )

6.Fast Signal Acquisition

7.Support single location and continuous tracking

8.Support speed alarm/movement alarm/low battery alarm 

9.Can be set up 5 authorized mobile number

10.Support check location by SMS and Internet

11.Locate the position by mobile phone via SMS

12.SOS button send out exact location for immediate rescue/action.

13.SD card save gprs data

14.Build in Montion sensor. send shake alarm when someone touch tracker .

15.Main power cut/ lost alarm

16.Distance limited data transmition 

17.Remote cut-off electricity &oil function

18.ACC start/ ACC off alert 

Configuración XT009

Country Operator APN User Password

To set a Xexun device on pLb9DW, you must configure it as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device.

  1. Begin with the configuration
  2. Set up our operator APN
    ZcK0Ioukh YG3QGmx
  3. Set the username and password of our APN.
    SMBvq2QwCKTbU bDm1Iy9D
    OGYzycze9ol8S0d BaZaHcV0
  4. Establish the server where we will connect
    fcRibwAr2qbz2 bU7T8rBadqlpK 98gi
  5. Set the device to send data
  6. How often we want to establish the position is sent every 60 seconds

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.