Menu
Locate and manage all your devices in one place.

istartek - VT900

 
Start Your FreeMonth
       
From $0.99 USD*Month/Device
       
Pay as you go. No contract
VT900
Visit the manufacturer website

Features: 
VT900 T
UMTS/HSDPA: 850/2100MHz
GSM/GPRS: 850/900/1800/1900MHz
VT900 A
UMTS/HSDPA: 850/1900MHz
GSM/GPRS: 850/900/1800/1900MHz
VT900 E
UMTS/HSDPA: 900/2100MHz
GSM/GPRS: 900/1800MHz
Track by SMS/GPRS
Track on Demand
Track by Time Interval
Track on Mobile Phone
Internal 8MB Memory for Logging
Inbuilt Tremble Sensor
Internal Backup Battery
SOS Alarm
Geo-fence Alarm
GPS Blind Area Alarm
Low Battery Alarm
Speeding Alarm
External Power Cut Alarm
Engine Cut (Engine immobilization)
Fuel Monitoring
1RS232++2OUTPUT+3INPUT
1 Analog Input Detection

Specification:

Items Specifications
Power Supply 10.6V - 36V / 1.5A
Backup Battery 500mAh
Normal power consumption 55mA/h
Dimension 65mm x 61mm x 26mm
Weight 90g
Work time 30 hours in power-saving mode and 7.5 hours in normal mode
Operating temperature -20 to 65 Degree
Humidity 5% to 95% Non-condensing
Frequency VT900 T
UMTS/HSDPA: 850/2100MHz
GSM/GPRS: 850/900/1800/1900MHz
VT900 A
UMTS/HSDPA: 850/1900MHz
GSM/GPRS: 850/900/1800/1900MHz
VT900 E
UMTS/HSDPA: 900/2100MHz
GSM/GPRS: 900/1800MHz
GPS Module Quectel L70
GPS Sensitivity -159Db
GPS Frequency L1, 1575.42 MHz
C/A Code 1.023 MHz chip rate
Channels 20 channel all-in-view tracking
Position Accuracy 10 meters, 2D RMS
Velocity Accuracy 0.1 m/s
Time Accuracy 1 us synchronized to GPS time
Default datum WGS-84
Reacquisition 0.1 sec., average
Hot start 1 sec., average
Warm start 38 sec., average
Cold start 42 sec., average
Altitude Limit 18,000 meters (60,000 feet) max
Velocity Limit 515 meters/second (1000 knots) max
LED 2 LED lights to show GPS/GSM status
Flash Memory 8MB
Interface 1RS232 port for connect with magnetic card reader
3 digital inputs
2 output
1 analog input

 

Standard Accessories:

VT900 3G Tracker GSM Antenna GPS Antena

 Power Cable

 

 Optional Accessories:

USB Data Cable Fuel Sensor Magnetic card reader Pin Switch     Relay  iButton RFID Card Temp. Sensor

Configuración VT900

Country Operator APN User Password

To set ShfRJm you need to configure as follows. With the following commands through several text messages:

  1. Reset factory settings
    Gtp1GZx3
  2. Set the time zone UTC-0
    DFYWhbYj
  3. Set up our operator APN
    k6AgsVwcDuI6NEgzTL0d3sYBQOlz2v
  4. Establish the server where we will connect
    Pet6jRRHe9aWAWMAxojAe8VGWdC
    or
    cAcOoJz790qPJYgS2ecYtubLN1h9
  5. Define that transmits every 60 seconds
    sjQAwlzre

To check parameter settings kFPjhN


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.