FM-500 Light+ is a device with GPS/GLONASS and GSM connectivity, designed for object tracking. It is able to acquire information on object location, speed, direction, etc. and transfer the data via GSM network. Digital and analog inputs of the device may be used to connect different external sensors/devices. Outputs of the device may be used to control external equipment remotely. Flexible configuration allows users/dealers to adjust the device to meet their specific requirements. It has 1-Wire (iButton), RS-232 and EIA-485 interfaces.
General |
|
Interfaces |
1-Wire (iButton) RS-232 EIA-485 |
Inputs |
4x digital (frequency, impulse counter, ON/OFF modes) 3x analogue, 11 bit, 0-36V |
Outputs |
3x digital, (-) |
Power supply |
8 – 36V Protection from impulses up to 120V Consumption at 12V: active: <50mA, sleep: <8 mA Registration of power cut-off to device event log Internal battery 700 mAh (optional) |
Internal memory |
4 МB, up to 150.000 entries |
Accelerometer |
LIS3DH |
Internal odometer |
+ |
Operational temperature range |
from -40 to +85 C° |
Dimensions |
26x80x55 mm |
Weight |
Tracker – 64 g, set – 160 g |
GSM |
Internal antenna |
GSM/GPRS class |
10 (up to 85,6 kbit), class B |
Detection of GSM jamming |
+ |
|
|
GPS / GLONASS |
External antenna |
Sensitivity |
-162 dBm |
Acquisition |
Cold <30 s, hot 1 s, A-GPS support |
Set Up FM-500 Light+
Use Plaspy with a tracker
-
Set the Operator APN
CountryCarrierAPN
User
Password
- Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server d.plaspy.com IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.