Loading...

NVS - CH-5704

A set of the automobile terminal manufactured by ZAO KB NAVIS, operating on the signals of the GLONASS / GPS / GALILEO / SBAS SNS with data transmission via the GSM channel.

The set of the automobile terminal is intended for use as a vehicle monitoring and protection system. The terminal is developed on the basis of navigation receiver NV08C manufactured by ZAO KB NAVIS.

The terminal has an open protocol of information exchange and can be integrated into any of the existing navigation and information systems.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up CH-5704

Country
Operator
APN
User
Password

To set BWh3R2 you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device

  1. Factory reset
    u3hZP8BnVXw
  2. Set the time zone UTC-0
    fJxH zkMz0cbpei b
  3. Set up our operator APN
    8nhpGcs4V SxzRCS4
  4. Set the username and password of APN operator
    yq622dqw CtgCVZaY G0NmjSc0
  5. Establish the server where we will connect
    Zi0BgUGv6PWab TbUTs08uQusL5 IQ5e
  6. Switch to GPRS mode to begin transmission UDP
    fOGXspi6bhqM38
    or
    YLsSFkNjvg

To check settings OczBv4xhh5b