Loading...

Telic - SBC3 IO

Telic SBC3 IO


The robust telematics unit for outdoor location applications

With its rugged and water-resistant housing, the SBC3 IO is ideal for track & trace applications that require outdoor installation. A fast and uncomplicated installation of the device is made possible in particular by the high-sensitivity GPS receiver as well as by the integrated GSM / GPS antennas.

The built-in rechargeable battery also ensures the transmission of position data even when the device is disconnected from the main power source. The available digital / analog inputs and outputs also enable the implementation of telematics applications such as the recording of the service life of vehicles.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up SBC3 IO

Country
Operator
APN
User
Password

To set oTZY6H you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device and the APN are to APN_OPERADOR

  1. Factory reset
    ipVH5pBFOZ1
  2. Set the time zone UTC-0
    Xuf5 9FszW5dPyf 5
  3. Set up our operator APN
    dPvpLnfs1 7DSPuen
  4. Set the username and password of APN operator
    w4Yhyi8h daNzAByd 0DY5xvaC
  5. Establish the server where we will connect
    dYqgNB9wWPKNC tBNSIm1Vs2vhI SJZb
  6. Switch to GPRS mode to begin transmission UDP
    BdWKDCChYsXcEi
    or
    cU1bMNQdPD

To check settings Co75xdF2Sbv