BlackKite-RTU is an affordable and expandable remote monitoring system supporting M2M cloud platforms via HTTP and MQTT protocols. It features rich set of IO and serial interface to acquire, monitor and control remote field devices at its best.
Device Highlights
Features
-
Supports cloud-ready HTTP/MQTT device protocols.
-
IO expansion with optional ModBus Interface.
-
Configurable data transmission interval, starting from 30 Sec,
-
Highly configurable TAG based parameter selection to reduce GPRS traffic
-
Configurable Device generated SMS alerts for IO state change
-
Internal FLASH memory to store 24 hours of data during GPRS outage
-
Two level authentication for remote device access (admin & manager)
-
Optional GPS support for location tracking
Interfaces
-
Dual band GSM/GPRS for connectivity
-
Status LEDs useful for device installation and troubleshooting
-
Digital and analog inputs to remotely monitor field sensors
-
Digital outputs to remotely control devices
-
Built-in battery for failsafe operation (~4 Hours)
-
Serial interface for extended sensors connectivity
Set Up RTU
To set the tracker send the following commands by SMS messages
-
Set the time zone UTC-0
SET TZ +00:00 -
Set the operator APN
SET APN {{apn}},{{apnu}},{{apnp}} -
Set the GPRS server
SET SERVER 54.85.159.138,8888 -
Switch to GPRS mode
SET GPRS 1 -
Set interval update
SET PERIOD 60,60 -
Save settings
SAVE
To check settings
- GET APN
- GET GPRS
- GET SERVER
- STATUS