Just insert the SIM card and configure access rights and the device is ready to be used. The Navigil PT220 is powered by its internal battery and can be recharged with the wall charger or even from any computer using the USB cable. Just drop it in your pocket, briefcase or backpack and you are ready to track!
PT220 can be configured to automatic GPRS or manual SMS operation. In GPRS mode PT220 will automatically send location reports periodically or at specified events such as geofence breaches. In SMS profile location can be queried with a phone call or SMS message.
Due to low-power sleep modes of the hardware and intelligent power management of the firmware, the Navigil PT220 can survive long periods without charging while still maintaining periodic reporting. Wakeup from a power saving mode can be triggered by a scheduled event, motion or an external input.
Use Plaspy with a tracker
Set the Operator APN
- Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server d.plaspy.com IP 18.104.22.168 Port 8888
- Add on your Account on devices with the IMEI or unique ID.