Start Your FreeMonth
From $0.99 USD*
Pay as you go. No contract
Get to the market in a matter of weeks using standard TD230 TG2 firmware and a rebranded user interface membrane with three push buttons and three LEDs. The print layer of the membrane can easily be customized for very low-cost rebranding. Navigil offers several different button and led layouts for the membrane.
The TD230 OEM devices come with a production ready, versatile firmware with support for several commonly used features like geofences, vehicle state monitoring, server reporting and power saving logic. Firmware in addition to all parameters and configuration files are over-the-air upgradeable. SDK gives further options for customization.
Due to low-power sleep modes of the hardware and intelligent power management of the firmware, a TD230 OEM device can survive long periods without external power while still maintaining periodic communication with a back-end server. Wakeup from a power saving mode can be triggered by a scheduled event, mechanical motion or an external input.
Use Plaspy with a tracker
Set the Operator APN
- Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server IP Port d.plaspy.com 220.127.116.11 8888
- Add on your Account on devices with the IMEI or unique ID.