SkyMobile - SM-8570

The SM-8570 is an advanced and powerful locator with portable GPS, designed for motorcycles, containers, merchandise, people and general asset tracking. Its GPS reception sensitivity is far superior to other devices in its category, which guarantees a fast TTFF (Time to First Fix) and GSM module quad-band 850/900/1800/1900. Your location can be monitored or reported periodically to a real-time server, or to any other device via SMS. Based on the @Track communications protocol, the SM-8570 can be connected to the communication servers via the GPRS / GSM network (or SM
S) to report emergency alerts, geographic barrier transfers, low battery alert, periodic GPS positions, GSM network information such as Cell ID, and multiple advanced tracking features. System integrators can easily configure their tracking platforms to communicate with the SM-8570 based on the @Track protocol.

Advantages * Water resistant. * Frequency GSM / GPRS quad-band 850/900/1800/1900 Mhz. * Integrated UBLOX GPS chipset with - 162dBm of tracking sensitivity and 148 dBm of autonomous sensitivity for fast TTFF and high precision. * Integrated GSM / GPS antenna. * Integrated with all the functions of the @Track protocol. * Function key with vibration response, easy to operate. * Built-in 3D motion sensor to detect motion and save energy. * Low power consumption Long standby time with internal battery. * Full control in power management can be connected to a DC source or external battery. * Easy-access front button that allows you to instantly configure the geocache. * 400 hours in standby and more than 200 days in standby with external battery.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up SM-8570


To set the tracker send the following commands by SMS messages, the sample setup the device password is qdmFoe, this password is the default

  1. Set the operator APN
  2. Set the GPRS server
  3. Set the update interval
  4. Enable SOS button
  5. Disable power saving mode