SkyMobile - SM-9570

The SM-9570 is a versatile and powerful GPS locator designed for vehicle and truck tracking applications. Its GPS reception sensitivity is very superior to other devices in its category, it also owns a rapid transmission cellular module TTFF (time to first fix), frequency quad-band 850/900/1800/1900. Its location can be periodically monitored or reported to a server, or any other device. The SM-9570 has multiple input and output interfaces that can be used to monitor or control external devices. Based on the embeddex @ track protocol, the SM-9570 can connect to the communication servers through the GPRS / GSM (0 SMS) network for emergency alerts, geographic barrier transfers, time and distance positions, Alerts, with GPS, GSM CELL IU, like many other advanced tracking features. System integrators can easily configure their tracking platforms to communicate with the SM9570 based on the @Track protocol.

Advantages * Operating voltage: 8a 32V DC * Integrated UBLOX GPS chipset with - 162dBm of tracking sensitivity and 148 dBm of autonomous sensitivity for fast TTFF and high accuracy. * Low power consumption, long standby time with internal battery. Frequency GSM / GPRS quad-band 850/900/1800 / 1900MHz. * Integrated with all the functions of the @Track protocol. * Multiple input and output interfaces for monitoring and controlling fleets. * Built-in 3D motion sensor to detect motion and save energy. * Integrated GSM antenna. * Integrated GPS antenna External (optional) * CE, FCC, PTCRB and Anatel certified.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up SM-9570


To set the tracker send the following commands by SMS messages, the sample setup the device password is 7VCtNu, this password is the default

  1. Reset factory settings
  2. Set the time zone UTC-0
  3. Set the operator APN
  4. Set the GPRS server
  5. Set update interval 60 seconds.
  6. Enable the digital inputs
  7. Enable SOS button input 2