Loading...

Suntech - ST 300

Suntech ST300 GPS Vehicle Tracker and Fleet Management telematics information needs Driving control of their vehicles. ST300 is the GPS tracker with more additional technical variations that presents by the company Suntech, the available versions of ST300 are: ST300V (Voice), ST300R (RS232), ST300B (Basic), ST300A (Advance), ST300P (Passenger Counter), ST300C (Can Bus), ST300F (Fuel Sensor), ST300H (High) and ST300K (Can Bus + 1 wire).

Features:

  • Brand:Suntech.
  • Model:ST300.
  • Target Market:Track & Trace, Vehicle recovery, Fleet Management, Telematics.
  • GSM band:Full quadband.
  • Voice:Yes.
  • Back up Battery:Yes.
  • Internal Memory:Yes.
  • Communication method:GPRS, TCP, UDP.
  • Position by:Time, Distance, Angle change.
  • Sleep mode:Yes.
  • Digital Inputs:3.
  • Pre-defined inputs:Ignition.
  • Analogue Inputs:2.
  • Internal events based:Yes.
  • Antennas:GPS, GPS internal, GSM internal.
  • Casing:Plastic.
  • Extra Connectivity:Fix antennas, Mic/Spk, Fuel Sensors, Temp Sensors, Driver ID, 1-wire, Serial Port.
  • Can Bus:J1939, OBDII.
  • Made in:South Korea.

 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up ST 300

Country
Carrier
APN
User
Password

To set the tracker send the following commands by SMS messages, the device ID is the last 9 numbers of IMEI excluding the last number.
for example, if the IMEI is VL5jvnOeFrTR2kL the device Id is D0lehWQaw

Type the IMEI Number Your Plaspy device ID is YnHQhTYlT4LvAlEuWRzvGTdT
  1. Reset the factory settings
    ST300CMD;{{('XXXXXXXXX' + imei.substring(5,14)).slice(-9)}};02;Reset
  2. Set the operator APN and GPRS server
    ST300NTW;{{('XXXXXXXXX' + imei.substring(5,14)).slice(-9)}};02;10;{{apn}};{{apnu}};{{apnp}};54.85.159.138;8888;;;;
  3. Set update interval 60 seconds
    ST300RPT;{{('XXXXXXXXX' + imei.substring(5,14)).slice(-9)}};02;60;60;60;3;0;0;0;0;0

To check settings ST300CMD;{{('XXXXXXXXX' + imei.substring(5,14)).slice(-9)}};02;PresetA