VT300GPS/GPRS/HSDPA Vehicle Tracking Device Expandable Design for Customization
- Communication by Voice, CS Data, SMS, GPRS UDP/TCP for 2G
- Communication by Voice, SMS, Edge, UMTS and HSDPA for 3G
- Configurable Tracking & Logging mode, by Time interval,
Distance interval, Speeding changes, Heading changes and IG status - User Defined Interface(UDI), expandable for customization
- GPS/GSM antenna tempering alert
- GSM Jamming alert (optional)
- Geo-fencing control
- Mileage report
- Power Low/Lost alert
- Towing away alert
- Speeding alert
- Power Management
- Roaming preference settings
- Maximum 100 settings in user defined reports
- Internet Surfing via USB connection
- Configuration over the air
- Firmware upgrading over the air
This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.
Set Up VT-300
Use Plaspy with a tracker
-
Set the Operator APN
CountryCarrierAPN
User
Password
- Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server d.plaspy.com IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.