Loading...

Zilogic - Fleet Pro

BlackKite-FleetPro is a robust and platform independent GPRS enabled vehicle telematics system. Its built-in accelerometer and OBD Interface eases, the monitoring and control of driving pattern and vehicle health.

Device Highlights

Features

  • Built-in accelerometer for driving pattern monitoring.

  • E-Call & B-Call for emergency and breakdown alerts.

  • Optional OBD II Interface.

  • On-line & On-demand tracking via GPRS & SMS

  • Configurable data transmission interval, starting from 30 Sec,

  • Highly configurable TAG based parameter selection to reduce GPRS traffic

  • Configurable Device generated SMS alerts for IO state change

  • Configurable Over Speed alert with SMS alerts

  • Internal FLASH memory to store 24 hours of data during GPRS outage

  • Two level authentication for remote device access (admin & manager)

  • Faster GPS lock, with Assisted GPS.

Interfaces

  • Dual band GSM/GPRS for connectivity

  • High accuracy GPS for location sensing

  • Status LEDs useful for device installation and troubleshooting

  • Digital inputs to remotely monitor in-vehicle status like door lock, oil level indication and fair meter

  • Digital outputs to remotely control in-vehicle appliances like AC, vehicle audio and infotainment systems

  • Analog inputs to monitor parameters like fuel level, vehicle load, and temperature

  • Dedicated SOS & ignition inputs with device generated SMS alerts

  • Built-in battery for failsafe operation (~4 Hours)

  • Serial interface to connect external sensors or devices

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up Fleet Pro

Country
Carrier
APN
User
Password

To set the tracker send the following commands by SMS messages

  1. Set the time zone UTC-0
    SET TZ +00:00
  2. Set the operator APN
    SET APN {{apn}},{{apnu}},{{apnp}}
  3. Set the GPRS server
    SET SERVER 54.85.159.138,8888
  4. Switch to GPRS mode
    SET GPRS 1
  5. Set interval update
    SET PERIOD 60,60
  6. Save settings
    SAVE

To check settings

  • GET APN
  • GET GPRS
  • GET SERVER
  • STATUS