Loading...

Truck Yard Geofences: Approach, Gate Entry and Service Times

Use Plaspy geofence alerts to prepare for an approaching truck, then confirm gate admission, bay assignment and service from the records that show them.

A yard geofence can tell you that Plaspy received a truck position across a boundary you drew on the map. For scheduled loading appointments, use that signal to decide whether the gate needs a check. Let the person or system responsible for admission, bay assignment or service completion record those separate events. A single entry labelled “arrival” can hide differences that affect what dispatch should do next.

Decide which question the shift needs the alert to answer before you draw the boundary. “Is the truck approaching our gate?” calls for a different area from “Has the truck crossed into our yard?” The first can give receiving staff time to get ready. The second can prompt them to check a pending admission. When the same outline is expected to do both jobs, a vehicle passing on the approach road may be treated as an admitted arrival.

Access, queueing and unloading have separate times

Consider a shared yard serving two warehouses. Trucks turn off the main road into the same lane, split at the gates and sometimes wait on a service road alongside the fence. In this illustrative example, the first report inside the wider area is at 08:12. The gate logs the truck at 08:23. The receiving bay takes it at 08:39. All three times can be accurate because they describe different events.

The intervals also tell you where to look for a delay. In this example, eleven minutes separate the approach report from admission. Another sixteen separate admission from the receiving bay. The full twenty-seven minutes do not measure time in one queue. To investigate the time before entry, start with the gate. For a delay in bay assignment, keep the admission time and request the receiving record. Those two questions can start with the same GPS alert and still need different evidence.

A receiving coordinator can react at 08:12 and pull up the paperwork. A dispatcher deciding whether the carrier missed its appointment needs to know which event counts under the agreement. If the customer uses the gate log, the 08:23 admission is the relevant record. If the agreement is based on the start of unloading, ask for the bay's record. The GPS notification narrows the time and vehicle you need to look into.

In a shift note, preserve the source of each timestamp. “Gate confirmed admission at 08:23” gives the next dispatcher something they can verify. “Arrived 08:12” leaves them to work out whether someone saw a notification, spoke to the gate or checked a register. The same distinction helps if a customer questions a delay. You can trace where the truck was waiting before deciding who was in a position to resolve it.

A truck may cross your approach zone on its way to a different customer. It may also queue outside the polygon in the designated waiting area. Include both cases when you test the rule, before turning an alert into a reason to call every driver. A boundary that makes sense on a routine delivery needs a clear interpretation on the days when the truck follows a different sequence.

Match the boundary to a record somebody can check

Plaspy lets you draw virtual zones and configure entry and exit alerts. Its geofence guide describes monitoring virtual boundaries, and its alerts guide covers how to apply a rule to relevant devices. Draw the boundary with the people responsible for the gate and give it a name that points to an action. “North approach” can help receiving get ready. “North access crossing” can prompt a check of the gate log. The same report can be sufficient to prepare for an appointment and insufficient to resolve a question about admission.

Ask the gate team for two reference points before testing: where a truck waits before admission and where staff record its entry. If both places fall within one boundary, the notification is useful as an approach signal. A boundary fitted to the gate still depends on the reports received. A truck may cross between updates, and the first available point inside the yard may appear farther along the route. A line drawn correctly can still be unsuitable for recording the exact minute of entry.

If a site has two gates, note which unit reference each team uses and who handles a reassigned appointment. The person getting paperwork ready may need only the area name and truck reference. Someone asked to establish admission needs the appropriate gate, direction of travel and the source that can confirm it. An alert with an unclear recipient can be technically correct without helping either team.

A useful rule can be described in a handover note: “Reported inside north approach; prepare access; north gate confirms admission.” If the boundary crosses a public road, test with a vehicle that can pass without using the yard. The useful result is a clear instruction about whom to ask and which record to check. Changing the line alone cannot decide whether gate admission or loading service is the event you need.

Test three situations your team recognizes

Start with a routine entrance that gate staff can confirm. Note the truck, the direction, the observed time and the first report Plaspy placed inside the boundary. Keep the notification and the physical entry as separate facts. The test succeeds when the recipient knows what they can get ready and what they need to verify, including cases where the notification follows the truck by a few minutes.

Then observe a fleet truck that passes close by without entering. If it generates an approach signal, a dispatcher can use the map to decide whether to keep an eye on it. If it triggers a rule called “Yard admission,” the trial has exposed a label that promises more than the boundary can establish. Check the road, the selected vehicle and who was meant to receive the notification before changing the rule.

Finally, take a case that separates entry from service. A driver might enter, visit the scale and return to the queue. Another truck might use the yard to turn around while receiving is closed. Write down which movement you expect the rule to catch and which time the operation should rely on for the appointment. The bay coordinator can keep the delivery pending even though the map has already placed the truck inside the site.

Keep the three results in a brief record, with the observed time, source and action. Note whether the initial trial happened in good coverage and with staff expecting the visit. When the entrance, shift or queueing practice changes, repeat the case most likely to be affected. An initial trial gives you a baseline for that comparison. It does not make later exceptions GPS faults by default.

Read a notification as a prompt to check the context

When an alert comes in, open the correct vehicle in Plaspy and check the area, direction and time. Two trucks may have similar display names. Confirming the unit first keeps you from asking the gate about the wrong driver. Open the device timeline to compare nearby locations and alerts. If an entry is followed quickly by an exit, read the adjacent reports and ask the person who can confirm the gate or bay event at issue.

An absent alert does not establish that the truck stayed outside. Check whether the rule covers the vehicle, whether it was active at the time and whether you have reports near the entrance. The gate may have registered an admission without the tracker placing a usable point inside the polygon. Record that difference as a test observation. If a job needs an exact access record, the gate can remain the authority even when GPS alerts are helpful for most of the shift.

The tracker has to be installed, the service has to be active and reports have to reach the account. Notification channels depend on the subscription and settings, so validate the one your team actually uses. For a bay preparation alert, check both the timestamp on the report and when the receiving team saw it. A signal may still be useful for the incident record after the window for preparing the bay has already passed.

Look for repeated alerts near the edge, too. Drivers searching for a space can generate multiple crossings. A clearer name may help the next dispatcher understand what the rule does. Check whether the polygon is generating real crossings that do not need anyone to act. When the only purpose is to prepare documents, give the approach alert that one job and let the person at the gate confirm admission.

When the appointment or entrance changes

An exit alert can also be useful when staff agree on what it should prompt. In a pickup operation, dispatch might use it to ask whether the truck left with the paperwork it needed. A truck that exits to a waiting lane and later returns still crossed the boundary. The bay record or the gate's release record can tell you whether the loading job was complete. Write down the source if the shift report needs both events.

Suppose an appointment is moved to another warehouse in the same complex. The approach alert may still see the truck on the shared access road, but it no longer points to the original bay. Update the dispatch assignment and the person who should receive the signal. Then decide whether the boundary itself needs to change. Doing it in the other order can leave you with a technically valid alert that reaches a team with nothing to do about it.

Review the rule when a site relocates its main entrance, opens a temporary gate or moves the truck queue outside the old waiting area. Test one expected crossing and one nearby pass without entry. Compare both with what gate staff could see. A valid approach signal may be worth keeping even when it cannot distinguish the two. If the operator treats it as admission, check the name of the rule and the handover instructions as well as the map.

When explaining the rule to a new dispatcher, show a normal case and a case that needs an extra check. “North approach means prepare for a gate check” is enough if the dispatcher knows where to see the admission log. For an exit, point to the person or record that can confirm the service outcome. The aim is a signal tied to an action the shift can actually take.

Check the value of an alert after the trial

At the end of a busy shift, pick a few notifications and ask what happened after each one. Did someone prepare a bay, confirm the truck's gate admission or simply read a message without any useful action? Compare those results with the purpose you gave the rule. For a team that handles many arrivals, a rule that asks for the same manual check on every routine pass may add work even if the GPS event is accurate.

An approach notification can be worth keeping when it consistently helps staff prepare for something they can do. When most messages come from trucks that do not enter, a smaller area or a different set of vehicles may be appropriate. Ask gate staff which change matches the way the site actually works. The result should be a practical decision about the rule, without treating one shift as a measure of tracking performance everywhere.

Keep the boundary if it helps resolve a recurring question

A yard with a single entrance, a stable routine and timely reports can benefit from a simple entry notification. It lets staff focus on the trucks that need preparation or a check. At a site where several customers share an approach or drivers manoeuvre on a public service road, one approach signal paired with confirmation at each gate may work better than separate “arrival” alerts. Choose based on what the team needs to decide at that yard.

Before rolling the rule out to other sites, see whether day and night dispatchers use “approaching,” “admitted” and “received at the bay” consistently. Two entries in the handover record may be enough: the time of the GPS notification and the independently confirmed event. That distinction gives the next shift something it can act on even when a customer has different instructions or a new gate team is on duty.

If you are setting up an Eco5 Lite for a truck in Colombia, confirm with Plaspy how the device will be assigned and who will be able to see the alert. Start with a visit to a yard where you already understand the entry and queueing process. Ask Plaspy about truck tracking and geofence setup .

Home

Ready to get started with Plaspy?

Buy your GPS tracker or subscribe to our satellite tracking platform.
We'll help you choose the best option!
Call us or message us on WhatsApp: +57 (601) 580-3299


Reefer trailer temperature after a tractor swap: verify the reading

Match the sensor, compartment and time in Plaspy after a tractor swap. See which Ruptela Eco5 Lite readings you can attribute to each leg of the trip.

Truck fuel level after a tank or sensor replacement

Verify what the Ruptela Eco5 Lite reports after a fuel tank or sensor replacement and how to reconcile the reading in Plaspy with refuelling records.

Remote immobilization with Eco5 Lite: what to verify at fleet handover

Agree on a supervised test, the Plaspy command record and the return to service before accepting remote immobilization for an Eco5 Lite fleet truck.

How to check when a truck left the yard after ignition

Separate ignition, movement inside the yard and the truck’s departure. Give dispatch a time it can confirm before updating the receiver.

How long did a truck stop when its GPS reports have gaps?

Separate observed timestamps from the start and end of a truck stop. Use the Plaspy timeline to work out what the available reports can establish.

Truck movement alerts: how to confirm an authorized yard move

Match the unit, yard instruction and Plaspy event to verify an authorized truck move with a Ruptela Eco5 Lite and confirm where the vehicle ended up.

How to check whether a truck used a detour in GPS history

Look at the reports before, within and after a detour to see what Plaspy can establish about the route and where another trip record may help.

How to hand over a shift while a truck is still on the road

Build a dispatch handover around the truck’s last reported location, its timestamp and the action the next shift needs to take before updating a customer.

Boxtrack 4G: Understanding Its Installation Demonstration

Understand the Boxtrack 4G demonstration: its tester, relay and different panic inputs. Prepare a clear discussion about your installation and its checks.

Billing GPS Customers Across Different Platforms

Bring together billing for Plaspy devices, external trackers and phone lines. Understand each item and which actions remain with other providers.