EV - EV-100

Vehicle / Motorcycle GPS Tracker

 1. Weather proof and dust-resistant

2. Working performance is super stability.

3. Free real time online tracking service.

4. Wide Operating Voltage Range 6 to 36V DC

5. Internal antennas for economical installation & serviceability

6. Internal 3-axis accelerometer for power saving and motion detection

7. Smart power saving working mode

8. Reply maps link and car's real address (city, street, etc by SMS).

9. Geo-fence Management.

10. Over speed alarm.

11. Car power lost alarm, low power alarm.

12. Remote engine/oil cut-off by SMS and website.

13. Built in 1Mb flash memory, store 60000 waypoints.

14. GPRS blind area data re-upload function.

15. Firmware upgrade over the air.

16. Backup battery: 200mAh.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up EV-100


To set SUUbF6 you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device and the NPC are to APN_OPERATOR

  1. Set the time zone UTC-0
  2. Set up our operator APN
  3. You need to contact the manufacturer to enable the option to change server